Messmer’s Wood and Deck Cleaner and Brightener (Part A and B) powder concentrates are specially formulated to clean and brighten exterior wood decks, fences, log homes, and other exterior wood projects.
- Cleans and brightens exterior wood, removes gray and dirt
- Use before staining wood
- Excellent for deck maintenance
- Biodegradable, safe and easy to use
- Maximum strength concentrated powders
- Cleans or Brightens up to 500 square feet per jar
Cleaning and brightening your wood before applying a quality wood finish allows that wood finish to bring out the true beauty of the wood’s surface. Properly preparing the wood before staining is a very important step.
A cleaner is a detergent, it removes dirt and dust from the wood’s surface. A brightener removes tannin stains from woods prone to extractive bleeding, such as cedar and redwood. Tannins occur naturally in some woods and often appear as a dark discoloration after the wood is exposed to moisture. Using bleach is not recommended for cleaning wood. It destroys the lignin which connects the wood fibers together and gives the wood an unnatural washed-out look. Bleach should only be used to remove mildew before applying a wood finish.
Decks are hard to keep looking new. If your car sat outside for a year without being washed, would it look new? Wood traps dirt, dust, pollen and airborne pollutants, so you must remove them with a quality deck cleaner. We recommend cleaning your deck at least yearly. Twice a year is better. Don’t reapply stain too frequently, this can cause blotchiness and shiny spots.
Messmer’s Wood and Deck Cleaner (Part A) will clean up to 500 square feet of wood surface per 16 oz jar. One container makes up to five gallons of cleaning solution. Tough jobs may require multiple cleanings and/or a stronger mix, so coverage may be lower.
Messmer’s Wood and Deck Brightener (Part B) will brighten up to 500 square feet of wood surface per 16 oz jar. One container makes up to five gallons of brightening solution. Stronger mix ratios can be used on tougher jobs but will result in lower coverage rates.
Mix concentrates with water as per the label instructions, then apply with a garden sprayer or mop. After about five minutes, use a push broom or brush to scrub the wood surface. After allowing the product to work for twenty minutes, rinse with clean water.
Follow all label instructions are properly. These products will not harm the wood, your plants or your lawn and are bio-degradable.